Deutsch (DE-CH-AT)English (United Kingdom)French (Fr)Español(Spanish Formal International)

** NEW parameters on PrimeLab: ID162: Hyd. Perox. HR / ID163: Dissolved Oxygen**

« Products

PrimeLab
General Information

KopfBILD-4-00-PL_header

 

 

 

PoolLab
General Information

 

 
9 Pool Parameters:
 
Chlorine (free/combined/total)
pH-value
Alkalinity (Acid Capacity)
Cyanuric Acid (Stabilizer)
Active Oxygen (MPS)*
Bromine**
Chlorine Dioxide**
Ozone**
Hydrogen Peroxide*
 
PoolLab
 
Features
 
Bluetooth Equipped
Powerful App and Software
Free Cloud Space
6 Buttons for direct Access
IP68 Waterproof
Fixed but changeable cuvette

PoolLab

The new PoolLab® 1.0 is a single wavelength photometer for professional water analysis of private pools and spas.

An in-built but changeable cuvette allows quick water sampling by just dipping in the IP68 waterproof PoolLab®.

PoolLab® with its 6 buttons is designed for instant access to the parameters installed, which are: pH, Chlorine (free/combined/total), Alkalinity (Acid Capacity), Cyanuric Acid (Stabilizer). Active Oxygen (MPS), Bromine, Chlorine Dioxide, Ozone and Hydrogen Peroxide.

As PoolLab® uses wireless Bluetooth 4.0 technology, it can easily be connected to free software and app for test result management.
Once test results are synchronized, software and app allow dosage recommendations, based on individually entered water treatment chemicals. User can print test result reports, perform index calculation, such as LSI, and much more.

A free cloud server takes care that data on app and software are constantly synchronized, if the user decides to use this feature.


 

 

pH - range 6.50 - 8.40 pH
Chlorine (free/combined/total) - range 0.00 - 6.00 mg/l (ppm)
Alkalinity (Acid Capacity) - range 0 - 300 mg/l (ppm) CaCO3
Cyanuric Acid (Stabilizer) - range 0 - 160 mg/l (ppm)
Active Oxygen (MPS) - range 0.0 - 30.0 mg/l (ppm)*
Bromine - range 0.0 - 13.5 mg/l (ppm)**
Chlorine Dioxide - range 0.0 - 11.4 mg/l (ppm)**
Ozone - range 0.00 - 4.00 mg/l (ppm)**
Hydrogen Peroxide - range 0.00 - 2.90 mg/l (ppm)*

 

*requires reagent tablets not included in basic kit
**requires Glycine reagent tablets if chlorine is present.
   Glycine reagent tablets are not included in the basic kit



Manual as PDF

Visit


http://poollab.org


Download App

AndroidiOS